Differences

This shows you the differences between two versions of the page.

--- projects:meshnet:meshtastic [2025/10/28 12:33] – ↷ Page moved from projects:meshtastic to projects:meshnet:meshtastic xbr
+++ projects:meshnet:meshtastic [2026/01/03 18:55] (current) – orimpe
@@ Line 26: / Line 26: @@
 ----
+==== Custom Ringtones ====
+There are a few devices out there that support the use of RTTTL ringtones.
+      * SEEED T1000E
+      * LilyGo T-Deck
+Most any node with a buzzer should support custom ringtone configuration as well, but your mileage may vary.
+[[https://mtnme.sh/guides/ringtones/|more information here]]
 ==== Notes ====
-=== Seeedstudio T1000-E ===
-  * Power ON: Press the button once, wait for 5s until the buzzer sounds. If no response, connect the charging cable to chage the battery.
-  * Force Reset: Press and hold the button and attach thttps://github.com/SpudGunMan/meshing-aroundhe magnetic charging connector to device for once, then the device will reboot.
-===Och informativ===
   * Meshcore Projekt Säit [[https://meshcore.co.uk]]
   * Meshtastic gudd erklärt vun Meshhessen [[https://meshhessen.de/]]
   * Meshcore gudd erklärt [[https://meshcore-de.net/]]
   * Reticulum als Multitalent[[https://reticulum.network/]]
-  * [[https://meshtastic.org/docs/getting-started/flashing-firmware/nrf52/ota/]]
+  * OTA Updates [[https://meshtastic.org/docs/getting-started/flashing-firmware/nrf52/ota/]]
-  * [[https://github.com/SpudGunMan/meshing-around]]
+  * Mesh Bot for Network Testing and BBS Activities [[https://github.com/SpudGunMan/meshing-around|meshing-around]]
+  * e [[https://github.com/Yeraze/meshmonitor|meshmonitor]]